> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://basenataquashop.crisp.help/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# 🥽 How to Care for Your Swimming Goggles

# 💦 After Every Swim Session
* Rinse your goggles with clean, cold, non-calcareous water.
* Allow them to air dry naturally.
* Store them in a protective case or goggle box.

[**🔗 View our goggle cases**](https://www.nataquashop.com/catalog/swim_equipment,m=2/training_gear,c=5/goggles,sc=7)

# 🧼 Cleaning Your Goggles
If deposits appear on the inside of the lenses:
1. Slightly moisten a cotton swab.
2. Apply a small amount of Marseille soap.
3. Gently clean the area without rubbing the lenses.

|| ⚠️ Never rub the inside of the lenses with your fingers or a cloth.

# Preserving the Anti-Fog Coating
The inside of the lenses is coated with an anti-fog treatment that naturally wears over time.

### Standard Anti-Fog Goggles
To help extend the effectiveness of the anti-fog coating:
* Avoid touching the inside of the lenses.
* Simply rinse with clean water after use.
* Never rub the lenses with your fingers or a cloth.
* Store your goggles in a protective case to prevent scratches.

| 💡 Swimmer's Tip: When the anti-fog treatment becomes less effective, lightly moistening the inside of the lenses with saliva before training can help reduce fogging.

### Special Case: Arena Goggles Featuring "Swipe" Technology
Some Arena goggles, such as the Cobra Swipe models, feature **Swipe Anti-Fog technology**, which works differently from traditional anti-fog treatments.

✅ **When fog appears:**
1. Remove the goggles from the water.
2. Gently rub the inside of the lenses with your fingertip.
3. Briefly rinse the goggles in the water.
This technology reactivates the anti-fog treatment and can provide up to **10 times longer-lasting effectiveness** than a traditional anti-fog coating.

|| ⚠️ This procedure should only be used on models equipped with Swipe technology. On all other goggles, touching or rubbing the inside of the lenses may permanently damage the anti-fog coating.

[**🔗 View models featuring Swipe Anti-Fog technology**](https://www.nataquashop.com/catalog/?search=swipe)
# Special Care for Mirrored Lenses
Mirrored coatings are particularly sensitive to scratches.
👉 Always use a protective case to preserve their appearance and performance for as long as possible.